/ Resources / Articles / 12 Things Maintenance Can Do During Downtime

12 Things Maintenance Can Do During Downtime

maintenance healthy toolbox
Updated February 9, 2026 
Share:     

 

Quiet stretches are the perfect time to work smarter behind the scenes. Even without entering homes, your team can improve comfort, safety, and first impressions—tuning HVAC exteriors, refreshing lighting, sharpening curb appeal, and tightening processes so you’re ready when work orders surge.

Key Takeaway: Proactive work now creates faster turnarounds and fewer emergencies later.

Downtime doesn’t have to mean standing still. When unit access is limited or demand dips, maintenance teams can still create real value across the property. Use these windows to knock out exterior tasks, preventative checks, and shop improvements that boost curb appeal, reliability, and resident confidence.

Here are 12 areas that maintenance teams can focus on right now, without putting staff in danger:

  1. HVAC Maintenance

    This is a great time to perform exterior HVAC maintenance.

    • Clean condensate lines.
    • Trim bushes around condensers
    • Replace missing caps, tighten wire nuts/screws.
    • Level and secure units.
    • Repair or replace pipe insulation.
    • Paint exposed metal surfaces.

    Most importantly, take the time to clean the condensing unit. Grab a hose, coil cleaner in a poly pump sprayer, and work with the resident for an acceptable time for their AC to be turned off for an hour or so. Then, remove any debris from the outside unit and spray the coils, following up with a rinse after the recommended time period (specific to the coil cleaner manufacturer instructions).
  2. Lighting

    Check all the bulbs and fixtures in common areas. Clean fixtures and change exterior bulbs (usually when one goes, others will shortly follow). Maybe even take this time to convert to LEDs and use the maintenance team to do it versus a sub-contractor. Download our lighting preventive maintenance checklist for more tips.
  3. Irrigation

    Perform checks and repairs on the irrigation system. While you may usually have a contractor take care of irrigation, you can save on that expense and have the maintenance team tackle this area. Repair or replace broken solenoids or sprinkler heads. Clear popups and rotors, adjust patterns, adjust and secure risers.
  4. Pressure Washing

    Grab the hose, some Power Wash and the pressure washer and get to work. Tackle breezeways, common areas and parking lots to give them a clean and fresh feeling.
  5. Painting

    Take a critical look at the paint condition of exterior areas. Repair and paint office and clubhouse, property signage, breezeways, handrails, fences, and possibly doors. If you usually subcontract out painting, keep this work in house and have your on-site staff use roller/brushes if you don’t have paint sprayers.
  6. Pools

    Use this time to perform some extra TLC on the pool. Clean filters, pool tile, and the pool in general, etc. If you used an outside service, now may be a good time to bring it in-house. If you are just maintaining pool chemistry, we have Pool Chemistry Resources to help with that.
  7. Make Ready/Vacant Units

    Look for opportunities to save while getting units ready for the next resident. We recommend finding a way to handle some of the usual tasks in-house versus using outside vendors. Painting, flooring installation (plank or sheet vinyl) and carpet cleaning may be appropriate tasks.
  8. General Areas and Amenities

    Use this time to deep clean and sanitize high-traffic areas. While exercise equipment and workout rooms are closed, it is the perfect time to go the extra mile and get to areas not usually addressed. If Dog Parks remain open, keep up with those areas. Regularly clean and sanitize mail, trash, and other popular areas.
  9. General Safety and Curb Appeal

    If the team has been on property any length of time, it is easy to become used to little items and areas that need to be addressed. Safety and curb appeal need a critical eye, tasks may be easier to find than originally thought, such as:

    • Repair sidewalk trip hazards.
    • Replace cracked steps.
    • Fill parking lot cracks and holes.
    • Restripe parking areas.
    • Fill small holes and trip hazards in grassy areas.
    • Re-nail or screw wooden decks.
    • Check and secure handrails.
    • Correct damaged downspouts.
    • Repair or replace window and patio screens.
  10. Plan

    Determine how you are going to revisit “non-emergency” work orders. Be conscious of all your daily maintenance requests coming in and be aware of the parts needed. Once you are able to get back into units you may find properties all trying to place orders for parts at the same time. Stay within your budget and purchase needed parts now. Then, mark all your received supply orders with the unit numbers so you are ready to go when the time comes.
  11. Educate

    Take the time to train staff and educate residents. Online training courses and webinars are in ready supply right now. Have staff attend online trainings and meetings to learn new skills.

    Your staff can even use this time to knock out EPA608 and CPO certifications. Chadwell University is able to offer virtual certification options for our customers during the coronavirus shutdown. For course options, please review our schedule here.

  12. Shop Organization

    Declutter, re-arrange, sort, organize, etc. Just think how much time can be saved if your shop is organized and you can find exactly what you need for work orders. Pay close attention to safety and how equipment is stored. Check out this Virtual Lunch discussion for more helpful tips and tricks: Shop Organization: Now is the Time to Do It 

Other Related Resources

Find More Articles and Resources in